We're currently using the Epson v750-M (looks like this:
http://www.epson.com/cgi-bin/Store/jsp/Product.do?sku=B11B178061) to scan
glass negatives, negative strips and slides, etc. It's kind of
expensive...in fact, it has gone up about $100 since we purchased one about
6 months ago, but we feel it's worth it. Check out the PDF link on the
website for more information.
Becky
Local History Librarian/Archivist
Shilling Local History Room
Decatur Public Library
Decatur, IL
On Tue, Apr 30, 2013 at 9:04 AM, T Hopkins <[log in to unmask]> wrote:
> Assuming you'd rather spend time than money, you probably should buy a
> scanner, but it will take a LOT of time. Many flatbed scanners have
> lighted lids and special holders for slides, negatives, and other
> transparencies. Stick with major, reputable scanner manufacturers (Epson,
> Canon, HP) and find the scanners in the model lines that meet your specs.
> This is especially important if you need software. If not, any "twain"
> scanner will do.
>
> I would recommend a dedicated slide scanner rather than a flatbed if all
> or most of your materials and 35mm slide or negative. Scanners are pretty
> cheap and you may want both. Look for ease of use features for mass
> scanning. If you also have transparencies and other materials, a
> multi-purpose scanner might be your preference. These will often have
> plastic holders for many different sizes of transparency.
>
> For slides and negatives, you need very high resolution scanners.
> Remember, your original is very small and you want to squeeze as much
> detail as possible out of it if your intention is archival preservation. I
> would suggest a minimum of 4800x4800 dpi optical resolution. For
> professional work, it is not uncommon to scan negatives at 12,000x12,000
> dpi and higher. Most flatbeds will max out in the 4800x4800 range but
> dedicated transparency scanners have much higher scan resolutions.
>
> Cheers,
> tod
>
> On Apr 26, 2013, at 1:57 PM, Amanda Vtipil wrote:
>
> > Happy Friday!
> >
> > I am currently researching options for digitizing negative film and
> slides and was hoping you all might have some helpful advice. We are a
> small repository which houses archaeological collections. I am about to
> embark on a inventory of all non-digital images housed here but I need to
> provide a rough estimate of how much digitization may cost.
> >
> > At first I was considering sending these objects out to be digitized but
> as I looked at prices I realized that it may be possible to acquire a
> decent scanner specifically manufactured for this purpose for the around
> the same amount. Does anyone have experience with sending their negatives
> off to be digitized and do you have a ball park figure on how much it cost
> (per image I suppose)? Or does anyone have recommendations for a scanner
> capable of scanning slides and negatives well? Any insight into which
> option has worked better (or not so well) for you would be greatly
> appreciated! Thank you in advance!
> >
> > Have a good weekend!
> >
> > Amanda
> >
> >
> > Amanda Vtipil
> > Curator, Regional Archaeological Curation Facility
> > Contractor (Versar, Inc.)
> > DPW-EMO, Fort Lee, VA
> > 804.734.4436
> > [log in to unmask]
> > http://www.lee.army.mil/dpw/emd/cultural.resources.aspx
> >
> > =========================================================
> > Important Subscriber Information:
> >
> > The Museum-L FAQ file is located at
> http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed
> information about the listserv commands by sending a one line e-mail
> message to [log in to unmask] . The body of the message should
> read "help" (without the quotes).
> >
> > If you decide to leave Museum-L, please send a one line e-mail message
> to [log in to unmask] . The body of the message should read
> "Signoff Museum-L" (without the quotes).
> >
>
> =========================================================
> Important Subscriber Information:
>
> The Museum-L FAQ file is located at
> http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed
> information about the listserv commands by sending a one line e-mail
> message to [log in to unmask] . The body of the message should
> read "help" (without the quotes).
>
> If you decide to leave Museum-L, please send a one line e-mail message to
> [log in to unmask] . The body of the message should read
> "Signoff Museum-L" (without the quotes).
>
=========================================================
Important Subscriber Information:
The Museum-L FAQ file is located at http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed information about the listserv commands by sending a one line e-mail message to [log in to unmask] . The body of the message should read "help" (without the quotes).
If you decide to leave Museum-L, please send a one line e-mail message to [log in to unmask] . The body of the message should read "Signoff Museum-L" (without the quotes).
|