Subject: | |
From: | |
Reply To: | |
Date: | Thu, 1 Feb 1996 17:43:32 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I agree entirely with Henry Crawford's recommendations.
Our collections consist of 17th century to early 19th century muskets,
fowlers, rifles, pistols, blunderbusses, and a wall rifle or two. We apply
labels to metal components and the usual spot is on the inside of the
triggerguard bow. We apply the number using a base coat of 15% acryloid B-72
in toluene, then the number is applied with Gouache, and we top-coat with 15%
acryloid B-67 in naptha (this allows you to remove the top-coat & number and
leave the base coat intact). As with any substances which contains solvents
take all safety precautions seriously! (ie., adequate ventilation; no
sources of ignition; disposable gloves; use the smallest possible volumes;
ask for, read, and understand the MSDS sheets)
I would avoid stamping accession numbers into metal parts (a common practice
in the not-too distant past) and I would avoid using sticky paper labels (I
have spent numerous hours cleaning off the tarnish and corrosion products
from these things).
I believe that labeling has come up on the Museum-L list a number of times in
the past year and I remember that someone posted information on a new
high-tech system which could be tracked via a hand-held device. A system
such as this might be adaptable and work quite nicely for an extensive
firearms collection, particularly if security were of some concern. I know
that I would be interested in hearing about these new systems from those who
have had experience with them - perhaps someone could post the pertinent
information to the List.
Dave
David Harvey
Conservator of Metals & Arms
Colonial Williamsburg Foundation
P.O. Box 1776
Williamsburg, VA 23187-1776 USA
voice: 804-220-7039
e-mail: [log in to unmask]
|
|
|