I think you are over defining the object. I believe a spudder is a drilling
rig, primarily used in early shallow oil fields. I assume it is a primarily
wooden tower structure, with iron and steel castings and cables. Rather than
look for a conservator with experience in spudders, look for one with
experience in wooden industrial structures.
If it has been left outside for any length of time it will probably need
restoration, rather than conservation. Look for someone from the historic
railroad community, a wagon, or windmill conservator/restoration specialist
should be able to evaluate the piece and give you an idea of what is needed.
In many cases the solution is to replace all the wooden parts. This sounds
extreme to curators used to fine art or other smaller pieces. In reality,
it is the way these objects were cared for when they were used to drill oil
wells rather than educate the public. We have a railroad car in a local
collection which was rebuilt, and in the process had all the wood replaced
at least twice in its service life. Restoration will require replacing at
least 30% of the wood.
At the other end of the spectrum, there have been some restorations of these
artifacts by use of epoxy consolidators for the wood, and wax finishes for
the iron, but unless the object is going to be stored and displayed indoors
this not really appropriate. Additionally, most objects like this have
been allowed to deteriorate to a condition which does not represent their
appearance when in use. Conserving them, in this deteriorated state does
not really educate the public about the oil business, instead it would be
representative of a machinery junk yard.
Randy Hees
Patterson House at Ardenwood Farm
City of Fremont, California
----- Original Message -----
From: "Kristin Mravinec" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, August 01, 2007 8:32 AM
Subject: [MUSEUM-L] Restoration of Spudder Rig
> We have an 1918 Wichita Fall Spudder, Model #66 rig in our collection that
> the Board has decided to restore. It is a wooden rig with metal components
> displayed outdoors without protection. I have been given an August 15th
> deadline to come up with a conservator to serve as a consultant because we
> are being considered for a centennial grant. Does anyone know of an
> conservator or consultant who has experience working with rigs. I will be
> checking AIC's website but wanted to narrow down some names first. If
> needed, I can attach some photographs of the rig's poor condition.
>
> Kristin
>
> --
> Kristin Mravinec, Curator
> Greater Southwest Historical Museum
> 35 Sunset Drive
> Ardmore, OK 73401
> Phone: 580.226.3857
> Fax: 580.226.3857
> [log in to unmask]
>
> =========================================================
> Important Subscriber Information:
>
> The Museum-L FAQ file is located at
> http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed
> information about the listserv commands by sending a one line e-mail
> message to [log in to unmask] . The body of the message should
> read "help" (without the quotes).
>
> If you decide to leave Museum-L, please send a one line e-mail message to
> [log in to unmask] . The body of the message should read
> "Signoff Museum-L" (without the quotes).
>
=========================================================
Important Subscriber Information:
The Museum-L FAQ file is located at http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed information about the listserv commands by sending a one line e-mail message to [log in to unmask] . The body of the message should read "help" (without the quotes).
If you decide to leave Museum-L, please send a one line e-mail message to [log in to unmask] . The body of the message should read "Signoff Museum-L" (without the quotes).
|