A couple quick thoughts on cases for textiles.
Exterior lights generally are better than interior. If you use track as
suggested, consider MR16 bulbs/fixtures. Get the bulbs that have a heat
filter - most of the heat goes back, not with the light. MR16s give off
little to no UV. Of course, you want to keep the total light intensity on
the textiles below 50 lux (5 foot-candles).
Consider glazing the doors with UV-filtering plexiglass. This will filter
out UV from surrounding fluorescent lights, or if someone decides to switch
lights in the tracks down the road.
Coat/cover ALL surfaces of wood inside the case, including edges/ends of
exposed boards, such as shelves or doors. I can't comment personally on the
formica as a barrier and as being stable over time. If you want a paint
barrier, the best would be aluminum flakes in shellac or possibly in a
water-borne acrylic. You will probably have to make your own, as I am not
aware of an appropriate product off the shelf. Shellac has pretty good
vapor barrier properties and acrylics have rather poor vapor barrier
properties, so the shellac would make the best paint. If you don't want to
make your own paint, I would use BIN (Zinsser), which is white pigmented
shellac. Use 3 coats minimum of any coating. Thicker is much better than
thin. Shellac solvent (alcohol) evaporates pretty quickly. Allow
everything to dry at least 2 weeks and preferably 1 month before use. If
you go with a mineral spirits (paint thinner) based product, wait at least 1
month and preferably 2 months.
I agree with yellow poplar (liriodendron tulipifera - poplar [cottonwood
family or Populus spp.] is a different wood) over oak. However, probably
the builder will want to use plywood. Look for one that is low in urea
formaldehyde (or any other formaldehyde). Generally, this requires an
exterior-rated product, not an interior rated one. But my info may be out
of date - any other opinions on this? They could avoid all of this with
stainless steel cases - don't you think they would be fitting for a
hospital?
Marc Williams
American Conservation Consortium, Ltd.
4 Rockville Road
Broad Brook, CT 06016
www.conservator.com
860-386-6058
*Collections Preservation Consultation
*Conservation Assessments & Surveys
*Low-Tech Environmental Control
*Moisture Management Solutions
*Collections in Historic Structures
*Conservation Treatment of:
Furniture
Painted Wood
Horse-Drawn Vehicles
Architectural Interiors
Marc A. Williams, President
MS in Art Conservation, Winterthur Museum Program
Former Chief Wooden Object Conservator, Smithsonian Institution
Fellow, American Institute for Conservation (AIC)
----- Original Message -----
From: "Diane Gutenkauf" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, March 23, 2007 11:00 AM
Subject: Re: [MUSEUM-L] Advise on constructing exhibit wall cases
Hi Erika
Several easily available sources could help you, one from the National Parks
Service and one from the National Association for Museum Exhibition (NAME)
From NPS, follow this link to a group of resources on exhibit conservation
http://www.nps.gov/hfc/products/cons/ex-con.htm
From NAME, you can order a copy of the journal "The Exhibitionist" that
focuses on exhibits and conservation. (www.name-aam.org) Look for the
Publications link on the left and then scroll down to to the Fall 2001
issue "Designing for Conservation" Ordering instructions are on the web
site.
One short answer to your question is: clear poplar is a good wood choice,
oak
is a really bad one as it is an acidic wood. Look for low VOC paints and
sealers
and allow them to off gas for several weeks, 6 would be ideal.
You can laminate the interior of the case with Formica (yes, Formica) for a
fairly neutral surface that will seal against wood off gassing. As for
venting
the case, you need to balance that against dust or insect infiltration.
Your concerns should also center around how stable the garments are, how
bright the lights are, and how consistently the temperature and humidity can
be maintained.
You might also look for the NPS Conserve-o-grams. They're online and a great
source of brief, easy to use, information on preservation and exhibition for
many objects.
http://www.cr.nps.gov/museum/publications/conserveogram/cons_toc.html
Diane
Diane Gutenkauf
Director
Robert R. McCormick Museum at Cantigny
1S151 Winfield Rd.
Wheaton, IL 60187
630-260-8159 (v)
630-260-8160 (f)
[log in to unmask]
www.cantigny.org
On Thu, 22 Mar 2007 14:43:01 -0900, Erika Brown
<[log in to unmask]> wrote:
>Hello. I am trying to help a local hospital with their design /
>construction of two wall display cases for their new diagnostic wing. I
>am trying to find some design examples and preferred materials. They
>are wanting to build two large cases in a waiting room area for
>displaying garments. Track lighting will be used rather than having
>lights in the case. Most likely the case will be constructed of wood
>with glass or acrylic.
>
>Even though wood is not the most ideal material, is there one type that
>is better than others to use? Would it be feasible to paint the
>interior of the case with paint to mitigate off-gassing and leave the
>outside as unpainted wood? Is there one type of paint that is better
>than others? What about ventilation?
>
>Does anyone what any wall case designs they would be able to share?
>
>Thank you in advance for any advice you might have!
>Erika
>
=========================================================
Important Subscriber Information:
The Museum-L FAQ file is located at
http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed
information about the listserv commands by sending a one line e-mail message
to [log in to unmask] . The body of the message should read "help"
(without the quotes).
If you decide to leave Museum-L, please send a one line e-mail message to
[log in to unmask] . The body of the message should read "Signoff
Museum-L" (without the quotes).
=========================================================
Important Subscriber Information:
The Museum-L FAQ file is located at http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed information about the listserv commands by sending a one line e-mail message to [log in to unmask] . The body of the message should read "help" (without the quotes).
If you decide to leave Museum-L, please send a one line e-mail message to [log in to unmask] . The body of the message should read "Signoff Museum-L" (without the quotes).
|