Hate to send a discouraging word, but I learned at a Collection Managers
Committee workshop sponsored by the Texas Association of Museums that some
liquids act as food and spread the problem.
I had in the past used lemon oil on my antique cherry desk when I saw a mold
outbreak in one spot. The species I have appeared to disappear in the
immediate cleaning, just like a Pledge commercial. However, the next time I
left the AC off when traveling out of town in the summer, the mold
reappeared everywhere the cleaning rag went with broad wipe areas of
expansion!!!!
Q-tips and brushes to our amazment spread the mold out also. We could see
puffs of mold dissipate under the microscope as we tried to brush them off.
The recommendation on that occassion was in addition to wearing mask and
gloves for you, vacuum with a good HEPA filter vacuum. We were looking at
old documents, not CDs. However, brushing will spread the spores either way.
Mary Kirby
[log in to unmask]
----- Original Message -----
From: "Mark Janzen" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, September 21, 2005 9:17 AM
Subject: Re: Cleaning mold off Compact Discs
> Thanks Pam,
>
> I was not thinking about that. Certainly we should all protect ourselves
> from the spores and any chemicals.
>
> I am personally quite allergic to a number of mold varieties, so I
> generally know when it is around before I see it.
>
> Mold can grow on practically any surface. Cellulose makes a much better
> growth medium for some, but it is not required for all types. The only way
> to prevent it completely is to not provide the environment for it to grow.
> Spores are everywhere, and can not be kept off objects or out of any given
> space where we go on a regular basis. Give them the warmth and moisture
> and
> it will grow.
>
> I'll wager there is a best methodology for each mold/material combination
> that would remove the mold and do the least damage. Personally, for a
> non-collection set of computer speakers, I would probably go with a little
> Lysol first, a toothbrush for abrasion, and a good rubbing alcohol
> wipedown. Then a little time in the sun for good measure. Then do not put
> them back in the same microenvironment. The sun will not kill the spores,
> but it does have negative effects on live mold rhizomes(I think they are
> called).
>
> I do not honestly know if it is worse/better to clean dry or wet, in terms
> of removing the obvious mold. You are right that it is capable of
> spreading
> through spores in both states. I would suspect there would be some
> suppressive benefit to cleaning it wet. My thinking being that wet spores
> will not travel as easily. Museum objects that are infested will wait for
> a
> conservator.
>
> Mark Janzen
> Registrar/Collections Manager
> Edwin A. Ulrich Museum of Art
> Martin H. Bush Outdoor Sculpture Collection
> Wichita State University
> (316)978-5850
>
>
>
> Pamela Silvestri
> <PodunkLander@AOL
> .COM> To
> Sent by: Museum [log in to unmask]
> discussion list cc
> <[log in to unmask]
> SE.LSOFT.COM> Subject
> Re: Cleaning mold off Compact Discs
>
> 09/20/2005 06:22
> PM
>
>
> Please respond to
> Museum discussion
> list
> <[log in to unmask]
> SE.LSOFT.COM>
>
>
>
>
>
>
> Mark,
>
> I too have had problems with mold growth - not on my CD's but on my stereo
> (plastic) speakers...perhaps there is a cellulose component in the plastic
> or cellulose-based coating on them? Regardless, I was surprised to see
> this
> mold, but what I was wondering is if it is better to clean off mold that
> has 'dried' first? It is my understanding that even if dry, there can
> still
> be active mold spores too?
>
> I'm not sure if it matters what kind of mold is being cleaned off, and in
> relation to the type of material the object is made of? What do you think?
>
> It has been a real challenge for me to deal with and control mildew and
> mold both at home and the museum where I work. I still have a lot to learn
> but I would have to say that taking precautions (gloves, masks) while
> cleaning it is very important.
>
> The CDC still claims that 'black mold' is relatively harmless - but they
> do
> advocate all the precautions. So I want to advocate the same here too
> along
> with the methods, etc., that you and others are suggesting for cleaning
> the CD's.
>
> Pam
>
> In a message dated 9/20/2005 10:17:59 A.M. Eastern Daylight Time,
> [log in to unmask] writes:
> George,
>
> CDs and DVDs are dye based technology. Even though the dyes are generally
> sealed under the reflective layer, I would think bleach is a very high
> risk. There are several types of cleaning solutions that are safe, which
> can be acquired at your local computer store/Radio Shack/etc.
>
> The acrylic media of the disks should not be a good medium for mold
> growth,
> and I suspect it will wipe off adequately. You should not need anything
> harsh to keep it from coming back, as long as the storage environment is
> upgraded. I would use a soft antistatic cloth, microfiber cloth or lens
> paper, and wipe the mold off. Only use an approved solution if it does not
> come off relatively easily. Never use a solvent or abrasive on any digital
> media. There is no faster way to lose your data, other than breaking the
> disk of course. I believe the manufacturers recommend not wiping in a
> radial pattern, but rather with the grooves in the disk.
>
> I'd be interested to know how it works out, and if the disks still play
> after being moldified.(yes, I know that is not a real word)
>
> Mark Janzen
> Registrar/Collections Manager
> Edwin A. Ulrich Museum of Art
> Martin H. Bush Outdoor Sculpture Collection
> Wichita State University
> (316)978-5850
>
> Pamela Silvestri, Museum Assistant
> Northeast States Civilian Conservation Corps Museum
> Shenipsit State Forest
> 166 Chestnut Hill Road
> Stafford Springs, Connecticut 06076
> (860) 684-3430
> ========================================================= Important
> Subscriber Information:
>
>
> The Museum-L FAQ file is located at
> http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed
> information about the listserv commands by sending a one line e-mail
> message to [log in to unmask] . The body of the message should
> read "help" (without the quotes).
>
>
> If you decide to leave Museum-L, please send a one line e-mail message to
> [log in to unmask] . The body of the message should read
> "Signoff
> Museum-L" (without the quotes).
>
> =========================================================
> Important Subscriber Information:
>
> The Museum-L FAQ file is located at
> http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed
> information about the listserv commands by sending a one line e-mail
> message to [log in to unmask] . The body of the message should
> read "help" (without the quotes).
>
> If you decide to leave Museum-L, please send a one line e-mail message to
> [log in to unmask] . The body of the message should read
> "Signoff Museum-L" (without the quotes).
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.11.0/103 - Release Date: 9/15/2005
>
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.0/103 - Release Date: 9/15/2005
=========================================================
Important Subscriber Information:
The Museum-L FAQ file is located at http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed information about the listserv commands by sending a one line e-mail message to [log in to unmask] . The body of the message should read "help" (without the quotes).
If you decide to leave Museum-L, please send a one line e-mail message to [log in to unmask] . The body of the message should read "Signoff Museum-L" (without the quotes).
|
