Subject: | |
From: | |
Reply To: | |
Date: | Thu, 20 Jun 2002 16:02:23 +0100 |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
The most reliable method of shifting chewing gum from paving or metal is
to freeze the patch rapidly to a very low temperature. This makes it go
crystalline and it then breaks up into powder when it is stuck with
e.g. a light mallet or hammer. There are special kits available for this
(try an janitorial supplies firm). However, I've seen people do this with
a blast from a liquid carbon dioxide fire extinguisher, or sound out a
friendly local plumber, who will probably have a liquid nitrogen kit that
they use to freeze water and heating pipes temporarily so that they can
carry out work on a system without having spend time (and expense)
draining down the whole of the plumbing system.
There will probably be a residual stain initially, but on a chunk of brass
as solid as that on a Steinway you could use an ordinary brass polish on
this.
Patrick Boylan
==========================
On Thu, 20 Jun 2002, Christian Carr wrote:
> Hello, all--Here is another plea for conservation advice. I've just noticed
> that one of the pedals of our recently restored 1909 Steinway concert grand has
> a hardened layer of chewing gum on it. (Looks like spearmint Extra to me!)
>
> Leaving aside the issue of how it got there, I wonder if anyone might have a
> suggestion as to the best way to remove it? I want to use something that won't
> harm the gold-toned finish on the pedal, and am not sure if a commercial
> product like "Goo-Gone" would be acceptable, or if there was something else
> that conservators would recommend.
>
> Thank you in advance for your suggestions!
>
> All best,
> Christian Carr
>
> Christian Carr
> duPont Scholar-in-Residence
> Department of Arts Management
> Sweet Briar College
> 434.381.6526
>
> =========================================================
> Important Subscriber Information:
>
> The Museum-L FAQ file is located at http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed information about the listserv commands by sending a one line e-mail message to [log in to unmask] . The body of the message should read "help" (without the quotes).
>
> If you decide to leave Museum-L, please send a one line e-mail message to [log in to unmask] . The body of the message should read "Signoff Museum-L" (without the quotes).
>
=========================================================
Important Subscriber Information:
The Museum-L FAQ file is located at http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed information about the listserv commands by sending a one line e-mail message to [log in to unmask] . The body of the message should read "help" (without the quotes).
If you decide to leave Museum-L, please send a one line e-mail message to [log in to unmask] . The body of the message should read "Signoff Museum-L" (without the quotes).
|
|
|