Subject: | |
From: | |
Reply To: | |
Date: | Mon, 23 Oct 2000 14:32:17 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Do you know a supplier of the plastic coated stainless steel wire,
preferably on the East Coast? Thank you for this bit of information about
monofilament and degrading to the point of breakage.
Jane
----- Original Message -----
From: "James Hascall" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, October 23, 2000 1:04 PM
Subject: Subject: Re: monofilament
> I have seen enough instances of degraded monofilament breaking that I am
> very shy about using it for weight bearing support, but if an assured
> yearly schedule for replacement with fresh mono could be set up, I feel
> that it will perform as required. However, the recommendation of fine
> plastic coated stainless cable with small swaged fastenings is a more
> secure solution that has little more visual weight.
>
> The other point that has not been brought up in this discussion is that
> of the concentration of load applied by this sort of very fine and
> strong material. Depending on the overall object weight, and the
> underlying structure and material, the force applied by a very fine line
> can indent the surface, or provide insufficient structural support to
> the object leading to gradual sagging damage. I would highly recommend
> sheathing the mono or cable at the point of weight bearing with felt,
> non PVC tubing, or other appropriate material to spread the load. Making
> sure there are sufficient points of support will relieve the tendency to
> sag as well as reduce the individual load on any one point.
>
> Sincerely,
>
> Jamie Hascall
> Lead mountmaker
> Hascall Museum Services
> Seattle, WA
>
> =========================================================
> Important Subscriber Information:
>
> The Museum-L FAQ file is located at
http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed
information about the listserv commands by sending a one line e-mail message
to [log in to unmask] . The body of the message should read "help"
(without the quotes).
>
> If you decide to leave Museum-L, please send a one line e-mail message to
[log in to unmask] . The body of the message should read "Signoff
Museum-L" (without the quotes).
>
=========================================================
Important Subscriber Information:
The Museum-L FAQ file is located at http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed information about the listserv commands by sending a one line e-mail message to [log in to unmask] . The body of the message should read "help" (without the quotes).
If you decide to leave Museum-L, please send a one line e-mail message to [log in to unmask] . The body of the message should read "Signoff Museum-L" (without the quotes).
|
|
|