Because of the large response I received about how to make cheap textile storage, I will reply on the list. Credit belongs to Rick Kerschner of the Shelburne Museum in Shelburne, Vermont. 1. Build a box out of plywood to the dimensions you need. For instance, 4' wide x 6' high x 2' deep. Leave the front facing you open. 2. Cut pieces of 1"x 2"x 2' or 2" x 2"x 2'. Mount these spaced evenly down the inside of each wall. (Visualize a bookcase if you will) 3. Coat all wood with BIN shellac. Let dry thoroughly, then paint with coat of latex paint. Let air cure for as long as possible. Now for the shelves . . . 4. Go to a plastics supply company or a sign supply company or even just a sign shop and purchase sheets of corrugated plastic, trade name Cor-X. It can be purchased in sheets 4'x8' and it is very inexpensive. It comes in colors, but white is my choice. It looks like cardboard, but is plastic and it's safe! It's easy to clean, too. It won't be strong enough to support weight by itself, even cut to smaller sizes, but all you need do is again cut some 1"x 2" to fit around the edges underneath to act as frames. Since these pieces won't come in contact with artifacts, no need to seal with shellac or paint. These framed pieces of Cor-X are your shelves that slide right in onto your 1"x 2"x 2' or 2" x 2"x 2' runners. The front frame piece also acts as a good handle to grip to pull the shelf forward for viewing. Mr. Kerschner actually has this type of shelving in use at his museum. So I feel very secure knowing it is safe for textiles, at least until a benefactor provides funding for "proper" storage. Hope this helps! Sincerely, Carolyn Payne Exhibits Designer Virginia Museum of Transportation 303 Norfolk Av. SW Roanoke, VA 24016 www.vmt.org Ph: 540.767.4643 Fax: 540.342.6898 E-mail: [log in to unmask] ========================================================= Important Subscriber Information: The Museum-L FAQ file is located at http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed information about the listserv commands by sending a one line e-mail message to [log in to unmask] . The body of the message should read "help" (without the quotes). If you decide to leave Museum-L, please send a one line e-mail message to [log in to unmask] . The body of the message should read "Signoff Museum-L" (without the quotes).