Traveling shows are tough on graphics.  The main problem is the unpacking
and repacking process dents edges and corner of graphic materials.  The
cheapest solution is to go to a 1/4" tempered masonite and overlam the
graphic print with a polycabonate.  The polycarbonate should be wraped over
the edges of the substrate to the back of the masonite.  The back of the
masonite must be sealed with eithier a primer of another piece of
overlaminate, the sealing of the back side prevents the print from cupping
or warping.

=========================================================
Important Subscriber Information:

The Museum-L FAQ file is located at http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed information about the listserv commands by sending a one line e-mail message to [log in to unmask] . The body of the message should read "help" (without the quotes).

If you decide to leave Museum-L, please send a one line e-mail message to [log in to unmask] . The body of the message should read "Signoff Museum-L" (without the quotes).