-----Original Message-----
From: Museum discussion list [mailto:[log in to unmask]]On
Behalf Of David Harvey
Sent: Thursday, October 30, 2003 11:35 AM
To: [log in to unmask]
Subject: Re: possessing weapons, 1984 & PC / cannonballs


I entirely agree with Mr. Burlakoff. Someone correct me please if I am in
error, but I believe that the WWII M1 Garand was a semi-automatic rifle with
a spring-fed 5 round clip. Maybe it's a matter of definitions - a
semi-automatic means that the rifle can only fire when the trigger is
depressed for each round. An automatic weapon is one is which the trigger is
depressed and there is a continuous rate of fire until the ammo either runs
out or there is a malfunction like jamming.

The Bureau of Alcohol, Tobacco, and Firearms in the USA (ATF) has a list of
firearm catagories and also a list of what they consider to be "antique" and
collectable weapons. Just go to their web site at www.atf.us.gov. If the M1
was automatic it would be classified and a Class III firearm and would not
be as readily available as it is to the general public.

You can acquire military automatic weapons that have been dearmed, usually
through the destruction of the reciever as per ATF regulations. I have a
WWII British Sten gun that has been demiltarized in this fashion.

Whether it is an old rifle or a cannon ball there is little need to panic or
be overly concerned. Keep the firearm in a secured area when not on exhibit.
If you also have ammo keep it entirely seperate from the gun storage. It is
always a good practice to get a competant arms conservator or gunsmith to
check the firearm, make sure it is not loaded, and to remove any of several
simple components that was disable it from firing. When I worked with
historic muzzle loaders I would simply use a wooden dowel, push it down the
barrel until it stopped, and mark lightly with a pencil at the end of the
muzzle. Then I'd check this against the outside of the barrel with the
muzzle marking aligned. If the near end of the dowel went past the touchole
to the breechplug line then the firearm was not loaded - if it stopped at
the touchole or slightly ahead of it then I assumed that the gun might have
either a partial or full charge.

As for cannon balls, if there is a fuse hole and the ball seems light for
it's size, then there is a distinct possibility that it is hollow shot and
may contain remnant powder. If you have one of these, keep it away from
steel tools and shelves. Call the local bomb squad for advice and help. I
have cleaned out archaeological grenades and hollow shot with black powder
remnants by immersion in water and using wooden and plastic tools. But this
is nothing that someone with little expertise should ever attempt.

Cheers!
Dave

David Harvey
Artifacts
2930 South Birch Street
Denver, CO  80222
303-300-5257
[log in to unmask]

=========================================================
Important Subscriber Information:

The Museum-L FAQ file is located at http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed information about the listserv commands by sending a one line e-mail message to [log in to unmask] . The body of the message should read "help" (without the quotes).

If you decide to leave Museum-L, please send a one line e-mail message to [log in to unmask] . The body of the message should read "Signoff Museum-L" (without the quotes).