The scrapers that Amanda is referring to can be purchased from Lee
Valley Tools
(http://www.leevalley.com/en/wood/page.aspx?p=53612&cat=1,43456,43407,53612).
Susan Maltby, Conservator
Maltby & Associates Inc.
Adjunct Faculty, Museum Studies Programme/Faculty of Information
University of Toronto
174 Spadina Ave., # 602
Toronto, Ontario
M5T 2C2
416-921-2877
Quoting "Dyer, Amanda" <[log in to unmask]>:
> Two additional tips:
>
>
> 1. A sign shop recently turned us on to plastic razor blades.
> They look exactly like a stainless safety razor blade, but are made
> of rigid plastic. I think ours were orange. They worked really well,
> although it can leave a little adhesive film behind on the wall. I
> haven't looked into a vendor so that I can purchase some of our own,
> but I need to get on that . . .
>
> 2. During our last deinstallation I primed over the shiny
> adhesive residue that was left on the wall before repainting and it
> has not bled through the new paint. Still looks great!
>
> Amanda Dyer
> University Art Galleries, Texas A&M University
> [log in to unmask]<mailto:[log in to unmask]>
> 979.845.9251
>
> From: Museum discussion list [mailto:[log in to unmask]]
> On Behalf Of Stump, Mary Mikel
> Sent: Monday, March 11, 2013 1:07 PM
> To: [log in to unmask]
> Subject: Re: [MUSEUM-L] Removing Vinyl
>
> I'm with Stacy. If there is any residue, we just sand it and paint.
> I am wondering if the heat is actually making it worse, since it
> would somewhat liquify the adhesive.
> Thoughts?
>
> Mary Mikel Stump
> Gallery Director | Curator
> The University Galleries, Texas State University
>
> Joann Cole Mitte Building
> Texas State University
> 601 University Drive
> San Marcos, Texas 78666
>
> 512.245.2664 [office]
> 512.665.0730 [mobile]
>
> www.txstgalleries.org<http://www.txstgalleries.org>
>
> From: Stacy Peterson <[log in to unmask]<mailto:[log in to unmask]>>
> Reply-To: Museum discussion list
> <[log in to unmask]<mailto:[log in to unmask]>>
> Date: Monday, March 11, 2013 12:26 PM
> To:
> "[log in to unmask]<mailto:[log in to unmask]>"
> <[log in to unmask]<mailto:[log in to unmask]>>
> Subject: Re: [MUSEUM-L] Removing Vinyl
>
> I just use a fingernail to peel up an edge and then the letters
> usually pull off pretty easily. I avoid blades since they can gouge
> the wall but they would save on sore fingers with large amounts of
> vinyl. We use an exhibition grade vinyl that has a lower tack. This
> doesn't help you much now but maybe they can use the lower tack
> vinyl next time.
> Stacy
>
> On Monday, March 11, 2013, Julie Leone wrote:
> Does anyone have a trick for removing vinyl lettering? We currently
> use a heat gun to soften the adhesive and then peel the letters off
> using razor blades or exacto knives. As we are in the middle of a
> deinstallation right now and scraping what feels like endless
> paragraphs of final, my co-worker and I were contemplating if there
> was some sort of trick or other way to accomplish this task.
>
> Any thoughts?
>
> Thanks!
>
> Julie
>
>
> ________________________________
>
> To unsubscribe from the MUSEUM-L list, click the following link:
> http://home.ease.lsoft.com/scripts/wa-HOME.exe?SUBED1=MUSEUM-L&A=1
>
>
> --
> Please note my new name and email address
> Stacy Peterson
> Collections & Exhibitions Manager
> Dubuque Museum of Art
> 701 Locust St.
> Dubuque, IA 52001
> (563) 557-1851
> [log in to unmask]<mailto:[log in to unmask]>
> www.dbqart.com<http://www.dbqart.com/>
> Follow us on Facebook <http://www.facebook.com/dbqart> &
> Twitter<http://www.twitter.com/dbqart>!
> ________________________________
>
> To unsubscribe from the MUSEUM-L list, click the following link:
> http://home.ease.lsoft.com/scripts/wa-HOME.exe?SUBED1=MUSEUM-L&A=1
>
> ________________________________
>
> To unsubscribe from the MUSEUM-L list, click the following link:
> http://home.ease.lsoft.com/scripts/wa-HOME.exe?SUBED1=MUSEUM-L&A=1
>
> =========================================================
> Important Subscriber Information:
>
> The Museum-L FAQ file is located at
> http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed
> information about the listserv commands by sending a one line e-mail
> message to [log in to unmask] . The body of the message
> should read "help" (without the quotes).
>
> If you decide to leave Museum-L, please send a one line e-mail
> message to [log in to unmask] . The body of the message
> should read "Signoff Museum-L" (without the quotes).
>
=========================================================
Important Subscriber Information:
The Museum-L FAQ file is located at http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed information about the listserv commands by sending a one line e-mail message to [log in to unmask] . The body of the message should read "help" (without the quotes).
If you decide to leave Museum-L, please send a one line e-mail message to [log in to unmask] . The body of the message should read "Signoff Museum-L" (without the quotes).
|