Subject: | |
From: | |
Reply To: | |
Date: | Tue, 15 Nov 2005 10:26:50 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Lowly thoughts:
The first was that are many low-tech ways to put something protective under
the cases that will not catch on the slate's ridges -tip slightly and slip
large sheet of heavy cardboard beneath, -slip thick washcloths under feet
to slide, etc.
However, the real problem comes when you have to remove the protecting thing
and you have to tip the case even a teeny bit with artifacts in it. Unless
the artifacts are absolutely firmly fastened in place you just can't do it.
So, is there any way you can affix something to the bottom of the case while
it is empty that will not have to be removed? Low pile carpet scraps? Thick
felt? Think the largere equivalent of those little felt dots you put under
lamps and ceramics to protect your table tops.
So, hark, the lesson is to those who are planning exhibit case systems...
make them so exhibits can be installed in place!
Lucy Sperlin
-----Original Message-----
From: Museum discussion list [mailto:[log in to unmask]] On Behalf
Of Tracy Sullivan
Sent: Tuesday, November 15, 2005 9:45 AM
To: [log in to unmask]
Subject: Trying not to scrape the floors... advice?
Hi everyone. We currently have some (rather heavy) pedestal-base exhibit
cases in a room with a slate floor. In order to install exhibits, the
cases need to be moved a bit. The floor has been newly refinished and
there is now concern that we are going to scrape the floor during
installation. Does anyone know of something that we can place on the
bottom of the cases to prevent scraping? The slate on the floor has some
natural ridging that means the floor isn't perfectly flat.
Any thoughts are welcomed.
Thanks!
Tracy Sullivan
~~
Director, John Q. Adams Center for the History of Otolaryngology--Head and
Neck Surgery
Alexandria, VA
=========================================================
Important Subscriber Information:
The Museum-L FAQ file is located at
http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed
information about the listserv commands by sending a one line e-mail message
to [log in to unmask] . The body of the message should read "help"
(without the quotes).
If you decide to leave Museum-L, please send a one line e-mail message to
[log in to unmask] . The body of the message should read "Signoff
Museum-L" (without the quotes).
=========================================================
Important Subscriber Information:
The Museum-L FAQ file is located at http://www.finalchapter.com/museum-l-faq/ . You may obtain detailed information about the listserv commands by sending a one line e-mail message to [log in to unmask] . The body of the message should read "help" (without the quotes).
If you decide to leave Museum-L, please send a one line e-mail message to [log in to unmask] . The body of the message should read "Signoff Museum-L" (without the quotes).
|
|
|